How To Repair Bone China

How to Mend Broken China

Comments: 0
Favorites: ane
Completions: ii

How to Mend Broken China

Time Required

2 - five hours

Introduction

China is delicate and will often break due to daily use and careless handling. This guide volition show yous how to effectively mend manifestly, slightly cleaved china using a clear epoxy filler.

Tip: You tin can add any paint to the epoxy, making the cracks less visible and the repair more subtle.

Wipe all broken edges with rubbing alcohol using a paper towel.

Wipe all cleaved edges with rubbing alcohol using a paper towel.
Do this to eliminate any grease and dirt.
Be aware that rubbing alcohol is highly flammable.
Exist enlightened of precipitous edges throughout this repair.

Pour epoxy into a smooth-surfaced container.

Cascade epoxy into a polish-surfaced container.
Nosotros used the plastic wrapping of the razor, but any container works.
Don't apply epoxy in a small, confined space.
Practice not get epoxy near optics or on skin. Consider using polyethylene or polypropylene gloves.

Mix epoxy fluids with a toothpick.
The fluid sets in 5 minutes, so you must quickly utilise information technology to the china. You can mix more if the first pour hardens.

Apply the epoxy along the edges of the base piece of china and outset chipped piece of china using the toothpick.

Attach the commencement detached piece to the base carefully by hand.
Adjust as needed.
Don't worry nearly excess epoxy at this signal. Information technology volition exist removed after setting.

Apply epoxy on the next discrete piece and the already mended piece
Employ a tweezer to adhere smaller fragments.

Adhere the piece to the china.
Adjust as needed
Repeat the process of applying epoxy and attaching the chips until all broken pieces are successfully in place.

Place mended communist china in a container of stabilizing sand or gravel.
This step is performed to put the right gravitational weight on the attachments and then the pieces don't become unaligned during the setting of the epoxy.
Get out to gear up for at least 1 hour.

Shave off as much backlog epoxy as possible using the razor.
Exhibit circumspection when using the razors; they are very precipitous!

Use fibroid sandpaper to farther reduce the backlog epoxy.

Use fine sandpaper to smooth out remaining inconsistencies.

Darker cracks form where the articulate epoxy functions as filler, but the cup will work perfectly fine! Add colored pigment to the epoxy for a more than subtle repair.